The wide range of seminars offered by the DriveAcademy® is aimed not only at our own employees, but also at our customers. In addition to training courses and seminars on our products, the program also covers personnel and organization development.
Close table
| Course | Course no. | Number of days |
|---|---|---|
| Inverter MOVIDRIVE® | E01 | 2 |
| Frequency inverter MOVITRAC® | E02 | 1 |
| MOVIMOT® and decentr. install. | E03 | 1 |
| Inverter technics for maintenance staff (PDF, 210 kB) | UE02 | 2 |
| Geared motors with brake | U01 | 1 |
| Mechanical and maintenance repairs (PDF, 373 kB) | U02 | 3 |
We have stored a table for you here.
For more information about our trainings, please contact:
Ulrika Lagerqvist +36 34 42 07, ulrika.lagerqvist@sew-eurodrive.se , or some of our sales-staff.
Our trainings are conducted at our head office in Jönköping. The trainings are led by qualified staff with many years of experience in electro mechanics, programming and commissioning.
Of course we also arrange hotel bookings etc.
Course: E01
Multi inverter MOVIDRIVE®, Commissioning / Maintenance
Training suitable for all kind of technicians from project engineers to maintenance personnel.
Training focus will mainly be of the type hands-on and how to operate the equipment.
After the training session the participants will possess:
- How to handle the software MOVITOOLS® MotionStudio.
- Commissioning of the equipment
- Function of the parameters
- Create and download IPOS-software
- Remedy the fault alarm
Without getting too deep we will walkthrough all option cards such as, communication card, absolute encoder card, synchronization card etc.
Agenda
- Theory for motor and frequency inverter
- MOVIDRIVE®
Structure and connections of the unit.
Walkthrough of parameters.
Operators control unit DBG.
Operation, startup, fault codes, trainings - Software MOVITOOLS®.
Walkthrough of the different software sections, practical exercises - Field bus
Walkthrough IPOSplus®. Parameters, software, variables. - Hands on trainings, save and download program.
General information
Training site: Facility at SEW-EURODRIVE AB, Jönköping
Cost: Contact SEW.
Training at customer’s site: Contact SEW for an offer.
Target group
Plant engineers and maintenance staff
Prerequisites: Basic electrical knowledge
Duration of training: 2 days
Max number of participants: 10
Course: E02
Frequency inverter MOVITRAC®B, Commissioning / Maintenance
Training suitable for all kind of technicians from project engineers to maintenance personnel.
Training focus will mainly be of the type hands-on and how to operate the equipment.
After the training session the participants will possess:
- How to handle the software MOVITOOLS® MotionStudio.
Course: E03
MOVIMOT® and decentralized installation
Training suitable for all kind of technicians from project engineers to maintenance personnel.
Participants receive a thorough review on the products both in theory and practice.
After the training session the participants will possess:
- Connect and implement a commissioning of the equipment
- Funktion of parameters
- Remedy the fault alarm
- Operate the equipment for decentralized installation
Agenda
- Short company presentation
- Theory for motor and frequency inverter
- MOVIMOT®
Structure, connection and function of the inverter.
Practical exercises - Decentralized installation
Walkthrough of the products
Exercise with Bus monitor
General information
Training site:Facility at SEW-EURODRIVE AB, Jönköping
Cost:Contact SEW.
Training at customer’s site: Contact SEW for an offer.
Target group
Plant engineers and maintenance staff
Prerequisites: Basic electrical knowledge
Duration of training: 1 day
Max number of participants: 10
Course: UE02
Inverter technology for maintenance staff
Training is intended for maintenance staff working with our inverter range.
We present our product range and you will have a thorough review of our software.
After completion of the training, participants will have the right skills to be able to analyze and troubleshoot using our software.
Program
- Overview of products
- Motor- and inverter theory
- Product knowledge - inverter program
- The software MotionStudio
- Online support, software tools and documentation
General informations
Training site: Facility at SEW-Eurodrive AB, Jönköping
Cost: Contact SEW.
Training at customer´s site: Contact SEW for an offer.
Target group
Maintenance personnal
Duration of training: 2 days
Max number of participants: 8
Course: U01
Gear motors with brake
Tre training is suitable for maintenance and repair personnel. The training is conducted with an emphasis on SEW gear units and motors. After the training session the participants will possess:
- Troubleshoot a gear motor/motor brake
- Refurbish a gear motor/motor brake
- Assemble a gear motor
Agenda
Overview SEW product range
- Adjustment of motor brake
- Troubleshooting a motor/gear/brake
- Walkthrough of spare part lists
- Lubrication/maintenance
- Revamping options, mounting positions and speed change
General information
Training site: Facility at SEW-EURODRIVE AB, Jönköping
Cost:Contact SEW.
Training at customer’s site: Contact SEW for an offer.
Target group
Maintenance and repair personnel
Prerequisites: Basic knowledge of gears/motors
Duration of training: 1 day
Max number of participants: 7
Course: U02
Course: U02
Mechanical maintenance and repair
- The training is aimed at maintenance personnel and repairmen with a focus on mechanics.
Everything is done with a focus on practical work with gearboxes.
After finished the training, the participants must have the correct knowledge to be able to disassembly, assembly and install gearboxes.
- The training is aimed at maintenance personnel and repairmen with a focus on mechanics.
Program
- Overview of products
- Rebuilding opportunities
- External impact gearboxes
- Troubleshooting gearboxes
- Installation and commissioning
- Disassembly and assembly of gearboxes
- Online Support tool for spare part lists, manuals and other documentation, configuration and more.
General informations
Training site: Facility at SEW-Eurodrive AB, Jönköping, SE
Cost: Please take contact with SEW for an offer.
Target group
Maintenance, mechanics
Prerequisites: Basic about gearboxes
Duration of training: 3 days, Tuesday-Thursday kW 47.