High overload capacity
as a load of up to 3,5 times the nominal motor torque in relation to the motor shaft can be achieved.
Safe control
Due to higher inherent mass inertia than with classic permanent magnet excited servo motors.
High speed quality
in one asynchronous servo gearmotor by means of a compact unit comprising gear unit and robust asynchronous servomotor.
High accuracy
by reducing the circumferential backlash in conjunction with high efficiency and high-endurance gearing.
DRL../DR2L.. asynchronous servomotors are particularly suitable when high external mass moments of inertia in relation to the motor shaft have to be controlled in a reliable manner. The design and dimensioning are of such a high quality that dynamic overload values of currently up to 350% 350 % of the nominal torque can be reached for a short time. The overload capacity is divided into two dynamics packages.
The DRL../DR2L.. series also has the required torque. With its four speed classes and a high-resolution sine/cosine encoder, a high speed quality is achieved – even at low speeds.
Our asynchronous servomotor also allows you to benefit from many additional features of the modular motor system of the DR.. series.
Only half the solution without a gear unit? Then use our modular concept and combine the DRL../DR2L.. series asynchronous servomotors with a gear unit to obtain the asynchronous servo gearmotor of your choice. Or simply choose the separate servo gear unit that meets your requirements.
| Size | Speed class rpm | Nominal torque Nm | Maximum torque dynamic package 1 Nm | Maximum torque dynamic package 2 Nm | Inertia kgcm² |
| 71-225 | 1200 | 2.7 – 290 | 5 – 770 | 8.5 – 1100 | 4.9 – 4330 |
| 71-225 | 1700 | 2.7 – 280 | 5 – 770 | 8.5 – 1100 | 4.9 – 4330 |
| 71-225 | 2100 | 2.6 – 285 | 5 – 770 | 8.5 – 1100 | 4.9 – 4330 |
| 71-225 | 3000 | 2.5 – 220 | 5 – 770 | 8.5 – 1100 | 4.9 – 4330 |
| Size | Speed class rpm | Nominal torque Nm | Maximum torque dynamic package 1 Nm | Maximum torque dynamic package 2 Nm | Inertia kgcm² |
| 71-80 | 1200 | 2.5 – 8 | 5 – 14 | 8.5 – 30 | 5.42 – 24.7 |
| 71-80 | 1700 | 2.7 – 9.6 | 5 – 14 | 8.5 – 30 | 5.42 – 24.7 |
| 71-80 | 2100 | 2.7 – 9.6 | 5 – 14 | 8.5 – 30 | 5.42 – 24.7 |
| 71-80 | 3000 | 2.6 – 9.2 | 5 – 14 | 8.5 – 30 | 5.42 – 24.7 |
| Dynamics package 1 | Dynamics package 2 |
| Mdyn ~ 200% MN: for mounting to gear units with standard pinion shaft ends | Mdyn ~ 300 – 350% MN: for mounting to gear units with reinforced pinion shaft ends |
| AC motor of the DRL.. series | |
| Size | DRL..DR2L..: 71, 80 DRL..: 90, 100, 112, 132, 160, 180, 200, 225 |
| Mounting position | S, M, L, MC, LC |
| Number of poles | 4 |
| Output options | |
| Output options | /FI, /FF, /FT, /FL, /FG, /FM, /FE, /FY, /FC |
| Mechanical attachments | |
| Brakes | BE05, BE1, BE2, BE5, BE11, BE20, BE30, BE32, BE60, BE62 |
| Manual brake release | HF, HR |
| Backstop | /RS |
| Temperature sensor / temperature detection | |
| Thermal motor protection | /TF, /TH |
| Temperature detection | /KT, /PT |
| Encoder | |
| Built-in encoder | /EI7C, /EI76, /EI72, /EI71 |
| Add-on encoder DR2L71-132 | EK8., / AK8. |
| Add-on encoder DRL71-132 | /ES7S, /ES7R, /ES7C, /AS7W, /AS7Y, /EV7., /AV7., /XV.., /XH.. |
| Add-on encoder DRL160-225 | /EG7S, /EG7R, /EG7C, /AG7W, /AG7Y, /EV7., /AV7., /XV.., /XH.. |
| Mounting adapter | /ES7A, /EG7A, /XV.A, /XH.A |
| Connection alternatives | |
| Connection alternatives | /IS, /ISU, /AB.., /AC.., /AD.., /AK.., /AM.., /AS.., /KCC, /KC1, /IV |
| Ventilation | |
| Fan guard | /C, /LF |
| Fan | /AL |
| Forced cooling fan | /V |
| Additional options | |
| Condition monitoring | /DUB |
| 2nd shaft end | /2W |
| Reinforced winding insulation | /RI |
| Condensation drain hole | /DH |